Garbage Dump Tipper



All welded steel construction to Specification St.52.3 or Equivalent.


4mm thick Curved plate stiffened on outboard by Top and Bottom 3mm thick stiffeners.


5mm thick plate mounted on 4mm thick pressed steel channels.

Head Board

4mm thick plate stiffened from outboard with 3mm thick horizontal and vertical stiffeners.


4mm thick plate, for protection of cabin.

Tail door

4 mm thick Curved plate side hinged with 2 leafs door opening 270 degree with suitable locking arrangement in the centre and sides of the body

Sub frame

UPN 150x75. The chassis runner is fixed to the chassis by means of side attachment plates, which are welded to the runner and bolted to the chassis. Side locators are provided to firmly body runner and chassis runner in the horizontal plane. The body runner is heavily hinged at the rear with provision for greasing. The lower frame is braced width wise at rear tipping hinge area.

Rear View Camera

Installation of Rear View Camera fitted on the chassis at rear and display monitor inside the cabin

Hydraulic system- PENTA - Italy

Under body hoist, European system. Pump mounted directly to the PTO flange. Hydraulic reservoir is mounted on the chassis runner. Operation of the tipping system is pneumatic from the driver’s cabin.

(PTO & its control to be provided by the customer)


  • Mudguard with mud flaps on rear axles.
  • Access ladder.
  • Hooks on sides and canopy for tie down of tarpaulin.
  • Rear under run bar with reflective sign.
  • LED Side marker lights on both sides 4no’s-Amber.
  • Spare wheel carrier-subject to availability of space
  • Tool box without tools.
  • Side Guards as per the space availability on the chassis with reflective sticker.
  • 1 No LED beacon light with brake applications at rear.
  • 6 kg Fire Extinguisher with box – 1no.


Sand blasted to SA 2.5 standard and painted with one coat of epoxy primer (DFT-100µ)and two coats of polyurethane finish paint (DFT-50µ) as per customer choice. Total DFT is more than 150µ